sludge processing equipment

1)High effcient for sludge dewatering 2)Fully automatic 3)Little noise and vibration 4)Low power consumption

Screw type sludge dewatering machine  

Configuration principle: 

The screw type sludge dewatering machine consists of fixed ring and moving 

ring and screw shaft is throughout in it as the filter unit. 

Dewatering principle: 

The sludge is conveyed to the dewatering zone after the gravity thickening , during 

the process of advancing, screw pitch of screw shaft becomes narrower and narrower 

and under the stop function of back pressing board, the very  large internal pressure is 

generated and the volume shrinks continually, so dehydration purpose is attained 

eventually.  

 The equipment parameters:

Model	DS Standard handling capacity		Sludge handling capacity
	low concentration =»high concentration		2000mg/L	5000mg/L	10000mg/L	20000mg/L	25000mg/L	50000mg/L
EX131	˜6kg/h	˜10kg/h	˜ 3m³/h	˜ 1.2m³/h	˜ 1m³/h	˜ 0.5m³/h	˜ 0.4m³/h	˜ 0.2m³/h

Size: 

Model	Screw shaft specification	The mud cake discharge outlet (The distance to the ground )(mm)	Machine size(mm)			Net weight	Operating weight
			Length	Width	Height
EX131	φ130×1	250	1969	756	1040	205kg	300kg

Operational condition:

Model	Motor Power(KW)			Water pressure for the cleaning	Water consumption for the cleaning (L/h)	Maintenance frequency	Consumable parts replacement cycle  (Year)
	Screw shaft	Mixer	Total				Screw shaft	Moving   ring
EX131	0.1	0.1	0.2	0.1kPa−0.2kPa (No need for high pressure washing device)	24	5 mins /day	3.4	1.7

sludge processing equipment