sludge handling machine EX-131

1) Exclusive and compact design 2) Low power consumption 3) Fully-automatic 4) Self-cleaning 5) Little noise & vibration

Screw press sludge dewatering machine  

Configuration principle: 

The screw type sludge dewatering machine consists of fixed ring and moving ring and 

screw shaft is throughout in it as the filter unit.  

Dewatering principle: 

The sludge is conveyed to the dewatering zone after the gravity thickening,during the 

process of advancing, screw pitch of screw shaft becomes narrower and narrower 

and under the stop function of back pressing board, the very large  internal pressure

 is generated and the volume shrinks continually , so dehydration purpose is attained

 eventually.

Equipment parameters:

Model	DS Standard handling capacity		Sludge handling capacity
	low concentration =»high concentration		2000mg/L	5000mg/L	10000mg/L	20000mg/L	25000mg/L	50000mg/L
EX131	˜6kg/h	˜10kg/h	˜ 3m³/h	˜ 1.2m³/h	˜ 1m³/h	˜ 0.5m³/h	˜ 0.4m³/h	˜ 0.2m³/h

Size: 

Model	Screw shaft specification	The mud cake discharge outlet  (The distance to the ground ) (mm)	Machine size (mm)			Net weight	Operating weight
			Length	Width	Height
EX131	φ130×1	250	1969	756	1040	205kg	300kg

Operational condition:

Model	Motor Power(KW)			Water pressure for the cleaning	Water consumption for the cleaning (L/h)	Maintenance frequency	Consumable parts replacement cycle (Year)
	Screw shaft	Mixer	Total				Screw shaft	Moving   ring
EX131	0.1	0.1	0.2	0.1kPa−0.2kPa No need for high pressure washing device	24	5 minutes/day	3.4	1.7

sludge handling machine EX-131